Home › Problems › Birds & wasps
Birds or wasps nesting in the pool cage
A torn panel, a gap under a super gutter, or a door that does not seal is an open invitation — the enclosure is doing the opposite of its job. On a Winter Springs cage old enough to have a few failed panels, the same holes that let debris and midges through also let birds and wasps in.
Where the actual openings usually are
- A torn or sagging panel — see why screens sag.
- A door that does not close flush — see the door diagnosis.
- Gaps at the super gutter or beam connections on an older frame, often where rust has already cracked the extrusion — see rust at the fasteners.
Why oak canopy makes it worse locally
Winter Springs’ older subdivisions — Tuscawilla, Oak Forest, Country Club Village — carry mature oak canopy directly over many cages. Overhanging limbs are both a source of the branch strikes that tear panels in the first place and a source of the birds and wasps looking for the next opening once one exists.
Birds and wasps questions
Do wasps actually nest inside an intact screen cage?
Rarely on the mesh itself, but commonly in the aluminium track and channel work, under the super gutter, or in any gap left by a torn panel or a door that does not seal. A cage with no openings gives wasps far fewer places to start.
Will rescreening alone solve a recurring bird or wasp problem?
It solves the entry point, which is usually most of the problem. If nests have already been established in the frame’s hollow sections, those need clearing separately — new mesh over an existing nest site does not remove it.
- Single panel repair cost — closing the opening before it grows
- Screen door repair cost — a door that will not seal is a common entry point
- Rescreen vs. repair — when several small openings add up to a full rescreen
Send a photo of where they are getting in
Usually a five-minute look at one panel or the door.
- Phone
- (689) 330-0968
- Serving
- Winter Springs, FL 32708 and Seminole County